Inverse identification of constitutive parameters from heat source fields: A local approach applied to hyperelasticity

In this paper, a new inverse identification method of constitutive parameters is developed from full kinematic and thermal field measurements. It consists in reconstructing the heat source field from two different approaches by using the heat diffusion equation. The first one requires the temperature field measurement and the value of the thermophysical parameters. The second one is based on the kinematic field measurement and the choice of a thermo-hyperelastic model that contains the parameters to be identified. The identification is carried out at the local scale, ie, at any point of the heat source field, without using the boundary conditions. In the present work, the method is applied to the challenging case of hyperelasticity from a heterogeneous test. Due to large deformations undergone by the rubber specimen tested, a motion compensation technique is developed to plot the kinematic and the thermal fields at the same points before reconstructing the heterogeneous heat source field. In the present case, the constitutive parameter of the Neo-Hookean model has been identified, and its distribution has been characterized with respect to the strain state at the surface of a cross-shaped specimen.     

大通煤业主斜井带式输送机设计变更及工艺优化

本文基于大通煤业矿井兼并重组整合项目初步设计,结合矿井配套选煤厂的建设情况,利用现有的带式输送机,重新优化了主斜井带式输送机设计方案,并对优化方案的难点提出了解决方法,为同类型矿井的改造设计提供了参考。     

Application of the novel Droplet digital PCR technology for identification of meat species

The authenticity and traceability of meat products are issues of primary importance to ensure food safety. Unfortunately, food adulteration (e.g. the addition of inexpensive cuts to minced meat products) and mislabelling (e.g. the inclusion of meat from species other than those declared) happens frequently worldwide. The aim of this study was to apply a droplet digital PCR assay for the detection and quantification (copies μL⁻¹) of the beef, pork, horse, sheep, chicken and turkey in meat products. The analysis conducted on commercial meat showed the presence of traces of DNA from other animal species than those declared. We show that the method is highly sensitive, specific and accurate (accuracy = 100%). This method could be adopted by competent food safety authorities to verify compliance with the labelling of meat products and to ensure quality and safety throughout the meat supply chain, from primary production to consumption.     

Study of traffic characteristics based on internet web real-time traffic conditions by image identification technology

With the rapid development of Internet, it is increasingly convenient to obtain real-time traffic condition information, which has greatly stimulated the improvement of urban traffic guidance. Traffic conditions are generally divided into four grades in the existing network platform, which are expressed in different colours. The understanding of traffic condition is still at the level of abstract senses. Therefore, it is difficult to grasp the characteristics of urban traffic. To this end, a new idea is proposed in this paper, and the new idea is to study the urban traffic characteristics based on real-time traffic condition information extraction with image identification technology. With this method, we can not only quantify the abstract traffic condition information, but also solve the loss of traffic condition information. In addition, an instance is analysed in this paper, it shows that it can provide references for urban traffic organization management very well.     

断层应力区巷道顶板支护优化设计

1208运巷在过F4断层时,巷道顶板出现破碎、下沉以及局部冒顶现象,不仅降低了巷道掘进效率,而且威胁施工安全。通过分析原巷道支护设计存在的主要问题,对原支护进行优化,提出了“注浆锚棚+纵向桁架锚索”等联合支护措施。通过实际应用效果观察发现,支护设计优化后,加强了顶板稳定性,防止了顶板冒落事故发生。     

Loss cost reduction and power quality improvement with applying robust optimization algorithm for optimum energy storage system placement and capacitor bank allocation

Power losses cause the underutilization of distributed generation (DG) units in addition to the cost increasing in microgrid. Minimizing these losses has been focused in many papers. Using energy storage system (ESS) is a crucial solution for loss reduction. ESS can balance the power exchange in on-peak times where its location and size optimization can improve the microgrid efficiency and reduce the loss cost significantly. Moreover, to ensure the power quality by improving the voltage profile, capacitor bank can be installed optimally on some buses. Optimization of size and location of the capacitor bank can enhance the reactive power that is leading to power loss reduction. In other words, the capacitor bank is applied to compensate the total reactive power and consequently, the current is reduced that results in power loss reduction. In this article, the problem is defined as the optimum location and size of ESS and capacitor bank in the microgrid. Due to the complexity of the problem in many options for selecting the buses to implement these elements (ESS and capacitor bank), robust approach using the particle swarm optimization algorithm and general algebraic modeling system are applied for optimization process. In addition, the uncertainty of renewable DGs such as photovoltaic and wind turbine is modeled by probability density functions and Monte-Carlo is used for selecting more probable cases in optimization processes. The results show the loss cost reduction and improvement in voltage and power profile with less fluctuations and more stability.     

Maximum likelihood-based adaptive differential evolution identification algorithm for multivariable systems in the state-space form

Parameter estimation plays an important role in the field of system control. This article is concerned with the parameter estimation methods for multivariable systems in the state-space form. For the sake of solving the identification complexity caused by a large number of parameters in multivariable systems, we decompose the original multivariable system into some subsystems containing fewer parameters and study identification algorithms to estimate the parameters of each subsystem. By taking the maximum likelihood criterion function as the fitness function of the differential evolution algorithm, we present a maximum likelihood-based differential evolution (ML-DE) algorithm for parameter estimation. To improve the parameter estimation accuracy, we introduce the adaptive mutation factor and the adaptive crossover factor into the ML-DE algorithm and propose a maximum likelihood-based adaptive differential evolution algorithm. The simulation study indicates the efficiency of the proposed algorithms.     

Relative vibration identification of cutter and workpiece based on improved bidimensional empirical mode decomposition

Frontiers of Mechanical Engineering - In the process of cutting, the relative vibration between the cutter and the workpiece has an important effect on the surface topography. In this study, the...     

Nonlinear robust dual-loop control for electro-hydraulic load simulator

This paper investigates on the high performance torque control of electro-hydraulic load simulator (EHLS). In order to suppress actuator׳s motion disturbance, a nonlinear robust dual-loop control scheme is developed, which consists of a open-loop nonlinear velocity feed-forward compensator and a closed-loop nonlinear deterministic robust torque controller. The main function of the open-loop compensator is to decouple actuator׳s active motion disturbance, whereas the torque loop controller aims at guaranteeing the dynamics performance of tracking torque reference. Besides actuator׳s motion disturbance, both the nonlinearity characteristics and friction problem of the EHLS system are taken into consideration in this paper. The effectiveness of the developed method are verified through comparative co-simulations and experiments.